FreeCostCalculator

Siding Replacement Cost Calculator
— Maryland

By FreeCostCalculator Team | Updated 2026

Free siding replacement cost calculator for Maryland. Get instant estimates by material type, wall area, and number of stories. No signup required.

Average: $6,700 – $16,200 9% above national avg

Siding Replacement Cost Estimate

Your result includes a low, typical, and high range plus cost assumptions.

Inputs affect labor, materials, permits, and local pricing · Results are planning estimates, not contractor bids

Total area to be covered. Directly affects material and labor quantities.

Higher-grade materials cost more but typically last longer. Affects both material and labor rates.

Multi-story homes increase labor complexity and equipment needs.

Used to apply state-specific labor rates, material costs, and permit fees.

How Much Does Siding Replacement Cost in Maryland?

The typical cost of a siding replacement in Maryland falls in the $6,700 to $16,200 range. The mid-range estimate sits at approximately $10,800, though your actual cost will depend on the scope of work, materials selected, and local labor availability.

Compared to the national average of $9,938, Maryland prices run about 9% higher. This is driven by a combination of local labor market conditions, regional material costs, and Maryland's permitting requirements. Permit fees in this state average around $300, which is factored into most contractor quotes.

Several factors influence where your project falls within this range. The choice of materials accounts for the largest variation: premium options can cost two to three times more than standard alternatives. Labor rates in $Maryland reflect the local cost of living and contractor demand, while the complexity of the job, accessibility of the work area, and time of year all play a role as well.

Siding Replacement Cost Breakdown in Maryland

The table below breaks down material and labor costs for each siding material available in Maryland. Costs shown are per square foot, with total estimates based on a typical 2,000 sq ft project.

Siding Material Material / sq ft Labor / sq ft Est. Total (2,000 sq ft)
Vinyl Siding $2.20 $2.30 $10,620
Fiber Cement (Hardie Board) $4.30 $4.60 $21,004
Wood Siding $4.90 $5.40 $24,308
Engineered Wood $3.40 $3.50 $16,284
Stucco $4.00 $4.30 $19,588
Stone Veneer $12.00 $10.80 $53,808

* Totals include estimated overhead (18% markup). Permit fees of $300 are not included in per-option totals. Actual costs may vary based on project specifics.

How Maryland Compares to Neighboring States

If you live near a state border, it can be worth understanding how siding replacement costs in Maryland stack up against neighboring states. Contractors in border areas sometimes serve customers on both sides, and material prices can differ based on regional supply chains and tax structures.

State Low Mid High vs. Maryland
Maryland (you) $6,700 $10,800 $16,200 --
West Virginia $4,900 $7,900 $11,900 -27%
Delaware $6,100 $9,800 $14,700 -9%
Virginia $6,100 $9,800 $14,700 -9%
Pennsylvania $6,400 $10,300 $15,500 -5%

Among Maryland's neighbors, West Virginia tends to have the lowest siding replacement costs with a mid-range average of $7,900, while Pennsylvania sits at the higher end at $10,300. These differences reflect variations in local labor markets, building code requirements, and material availability across state lines.

Factors That Affect Siding Replacement Costs in Maryland

Every siding replacement project is different, and several variables determine where your final cost lands within the typical $6,700 to $16,200 range for Maryland. Understanding these factors helps you budget more accurately and make informed decisions about where to invest and where to save.

Siding Material

Your choice of siding material has a direct impact on both material and labor costs. Options range from Vinyl Siding to Stone Veneer, and the price difference between the least and most expensive choice can be substantial. Contractors in Maryland can help you weigh the trade-offs between cost, longevity, and performance for each option based on local conditions.

Number of Stories

Your choice of number of stories has a direct impact on both material and labor costs. Options range from 1 Story to 3+ Stories, and the price difference between the least and most expensive choice can be substantial. Contractors in Maryland can help you weigh the trade-offs between cost, longevity, and performance for each option based on local conditions.

Permits and Local Regulations

Permit fees in Maryland average approximately $300 for this type of project. Local building codes may also require inspections at various stages, which can add time but help ensure the work meets safety standards.

Seasonal Timing and Contractor Availability

Contractor demand in Maryland fluctuates throughout the year. Scheduling work during slower seasons can sometimes yield lower bids, as contractors compete more actively for jobs. Conversely, peak seasons may mean longer wait times and higher prices due to increased demand. Getting multiple quotes regardless of season remains the best way to ensure competitive pricing.

Frequently Asked Questions

How much does siding replacement cost in Maryland?
The average siding replacement in Maryland costs between $6,700 and $16,200 for standard vinyl siding. Fiber cement and stone veneer cost significantly more.
What factors affect siding costs in Maryland?
Key factors include wall area, material choice, number of stories, local labor rates, and permit costs in Maryland.
How long does siding replacement take?
Most residential siding replacements take 1-2 weeks for vinyl or fiber cement. Stone veneer and stucco may take 2-4 weeks.
What is the most affordable siding material in Maryland?
Vinyl Siding is typically the most affordable option in Maryland, at approximately $4.50 per square foot (materials + labor). While it has the lowest upfront cost, consider long-term durability and maintenance requirements when choosing between options. The total project cost will also depend on your specific dimensions and local labor rates.
Do I need a permit for this project in Maryland?
Most jurisdictions in Maryland require a permit for this type of work, with typical permit fees averaging around $300. Permit requirements vary by city and county, so check with your local building department. Working without a required permit can result in fines and complications when selling your home.
Is Maryland more expensive than the national average for this project?
Yes, costs in Maryland run approximately 9% above the national average. The mid-range project cost of $10,800 in Maryland compares to a national average of $9,938. Higher labor rates, material transport costs, and local regulations can all contribute to this difference.

Compare with local contractor quotes

Use your estimate as a baseline to evaluate bids from licensed professionals in Maryland. Quotes are optional — your estimate above is yours to keep.

Get quotes to compare against your estimate

Optional. Connect with licensed contractors in your area.

More Cost Calculators for Maryland

Planning additional home improvements? Use our other free calculators to estimate costs in Maryland: