FreeCostCalculator

Garage Door Replacement Cost Calculator
— Florida

By FreeCostCalculator Team | Updated 2026

Free garage door replacement cost calculator for Florida. Get instant estimates by door size, material, and insulation type. No signup required.

Average: $1,060 – $3,500 6% above national avg

Garage Door Replacement Cost Estimate

Your result includes a low, typical, and high range plus cost assumptions.

Inputs affect labor, materials, permits, and local pricing · Results are planning estimates, not contractor bids

Higher-grade materials cost more but typically last longer. Affects both material and labor rates.

Used to apply state-specific labor rates, material costs, and permit fees.

How Much Does Garage Door Replacement Cost in Florida?

Based on current 2026 data, garage door replacement projects in Florida generally cost $1,060 to $3,500. The mid-range estimate sits at approximately $1,750, though your actual cost will depend on the scope of work, materials selected, and local labor availability.

Compared to the national average of $1,648, Florida prices run about 6% higher. This is driven by a combination of local labor market conditions, regional material costs, and Florida's permitting requirements. Permit fees in this state average around $125, which is factored into most contractor quotes.

Several factors influence where your project falls within this range. The choice of materials accounts for the largest variation: premium options can cost two to three times more than standard alternatives. Labor rates in $Florida reflect the local cost of living and contractor demand, while the complexity of the job, accessibility of the work area, and time of year all play a role as well.

Garage Door Replacement Cost Breakdown in Florida

The table below breaks down material and labor costs for each door size available in Florida. Costs shown represent typical project pricing before any multipliers for complexity.

Door Size Materials Labor Est. Total
Steel Single-8x7 $810 $0 $956
Steel Double-16x7 $1,380 $0 $1,628
Steel Single-9x8 $930 $0 $1,097
Steel Double-18x7 $1,570 $0 $1,853
Wood Single-8x7 $1,500 $0 $1,770
Wood Double-16x7 $2,750 $0 $3,245
Wood Single-9x8 $1,750 $0 $2,065
Wood Double-18x7 $3,120 $0 $3,682
Aluminum Single-8x7 $870 $0 $1,027
Aluminum Double-16x7 $1,500 $0 $1,770
Aluminum Single-9x8 $1,020 $0 $1,204
Aluminum Double-18x7 $1,720 $0 $2,030
Fiberglass Single-8x7 $940 $0 $1,109
Fiberglass Double-16x7 $1,620 $0 $1,912
Fiberglass Single-9x8 $1,100 $0 $1,298
Fiberglass Double-18x7 $1,870 $0 $2,207
Composite Single-8x7 $1,120 $0 $1,322
Composite Double-16x7 $2,000 $0 $2,360
Composite Single-9x8 $1,310 $0 $1,546
Composite Double-18x7 $2,310 $0 $2,726

* Totals include estimated overhead (18% markup). Permit fees of $125 are not included in per-option totals. Actual costs may vary based on project specifics.

How Florida Compares to Neighboring States

If you live near a state border, it can be worth understanding how garage door replacement costs in Florida stack up against neighboring states. Contractors in border areas sometimes serve customers on both sides, and material prices can differ based on regional supply chains and tax structures.

State Low Mid High vs. Florida
Florida (you) $1,060 $1,750 $3,500 --
Alabama $850 $1,400 $2,800 -20%
Georgia $890 $1,470 $2,950 -16%

Among Florida's neighbors, Alabama tends to have the lowest garage door replacement costs with a mid-range average of $1,400, while Georgia sits at the higher end at $1,470. These differences reflect variations in local labor markets, building code requirements, and material availability across state lines.

Factors That Affect Garage Door Replacement Costs in Florida

Every garage door replacement project is different, and several variables determine where your final cost lands within the typical $1,060 to $3,500 range for Florida. Understanding these factors helps you budget more accurately and make informed decisions about where to invest and where to save.

Door Size

Your choice of door size has a direct impact on both material and labor costs. Options range from Single (8x7 ft) to Double Wide (18x7 ft), and the price difference between the least and most expensive choice can be substantial. Contractors in Florida can help you weigh the trade-offs between cost, longevity, and performance for each option based on local conditions.

Door Material

Your choice of door material has a direct impact on both material and labor costs. Options range from Steel to Composite, and the price difference between the least and most expensive choice can be substantial. Contractors in Florida can help you weigh the trade-offs between cost, longevity, and performance for each option based on local conditions.

Insulation

Your choice of insulation has a direct impact on both material and labor costs. Options range from No Insulation to Polyurethane, and the price difference between the least and most expensive choice can be substantial. Contractors in Florida can help you weigh the trade-offs between cost, longevity, and performance for each option based on local conditions.

Permits and Local Regulations

Permit fees in Florida average approximately $125 for this type of project. Local building codes may also require inspections at various stages, which can add time but help ensure the work meets safety standards.

Seasonal Timing and Contractor Availability

Contractor demand in Florida fluctuates throughout the year. Scheduling work during slower seasons can sometimes yield lower bids, as contractors compete more actively for jobs. Conversely, peak seasons may mean longer wait times and higher prices due to increased demand. Getting multiple quotes regardless of season remains the best way to ensure competitive pricing.

Frequently Asked Questions

How much does garage door replacement cost in Florida?
The average garage door replacement in Florida costs between $1,060 and $3,500 for a standard steel door. Wood and composite doors cost significantly more.
What factors affect garage door costs in Florida?
Key factors include door size (single vs. double), material, insulation type, local labor rates, and permit costs in Florida.
How long does garage door replacement take?
Most residential garage door replacements take 3-6 hours for a standard installation. Custom wood or oversized doors may take a full day.
What is the most affordable door size in Florida?
Steel Single-8x7 is typically the most affordable option in Florida, at approximately $810 (materials + labor before overhead). While it has the lowest upfront cost, consider long-term durability and maintenance requirements when choosing between options. The total project cost will also depend on your specific dimensions and local labor rates.
Do I need a permit for this project in Florida?
Most jurisdictions in Florida require a permit for this type of work, with typical permit fees averaging around $125. Permit requirements vary by city and county, so check with your local building department. Working without a required permit can result in fines and complications when selling your home.
Is Florida more expensive than the national average for this project?
Yes, costs in Florida run approximately 6% above the national average. The mid-range project cost of $1,750 in Florida compares to a national average of $1,648. Higher labor rates, material transport costs, and local regulations can all contribute to this difference.

Compare with local contractor quotes

Use your estimate as a baseline to evaluate bids from licensed professionals in Florida. Quotes are optional — your estimate above is yours to keep.

Get quotes to compare against your estimate

Optional. Connect with licensed contractors in your area.

More Cost Calculators for Florida

Planning additional home improvements? Use our other free calculators to estimate costs in Florida: